It seems like this helmet project is moving so quickly. It must be because I am not doing the work on it. I like “working” on things like this.

We started cutting the Kashyyk Helmet parts. We will get into assembly within the next few days. So far so good! The parts will be glued together, sanded and seams will be filled.

We CNC’d the Kashyyk Backplate this weekend. We had to use two different types of foam due to our shipment not showing up. Ugh. Anyway, it wasn’t so bad. Of course, we still have sanding and minor shaping to do before we fill and seal the foam.

.

We’ve finished most of the models for the vacuum form bucks for the Kashyyk armor. Things are starting to move quickly. You should see some serious progress by this weekend.

A while back, we started 3D modeling the Kashyyk Trooper in an attempt to get as accurate of a depiction
as possible. This is the model so far. We’ve had to adjust the model from what we thought was accurate to what will be functional. Apparently, the goggles sit too high for a human head. You would not be able to see out if we don’t drop the goggles

After getting the file to a point where we feel comfortable calling it done, we went ahead and cnc’d it from foam.